5
. Removal & Installation of Engine
5-5
Carburetor type and other common
Mechanical
Remove the power coupler of auto by-starter.
Remove the spark plug cap.
Remove the generator power wire and pulse
generator connector.
Remove the starter motor wire.
Remove engine blow-by pipe.
Remove the fuel line, vacuum hose, and throttle
valve cable from the carburetor.
Loosen the clamp strip of air cleaner and
carburetor, and then remove the air cleaner hose.
To this chapter contents
Couplers of the generator and
pulse generator
Starter motor wire
Engine blow-by pipe
Clamp strip
Spark plug cap
Auto by-starter coupler
To Next Page
Loading...
Need help?
General
