1. General Information
1-17
E. Clutch, Driving And Driving Pulley
1. Clutch ling spring broken
2. Clutch outer cover stickled with clutch balance
weights
3. Connection parts in clutch and shaft worn out or
burned
Engine can be started but
motorcycle can not be moved.
FAULT CONDITIONS
PROBABLE CAUSES
1. Driving belt worn out or deformation
2. Driving disk damaged
3. Driving pulley spring broken
4. Clutch ling broken
5. Driving slide-shaft gear groove broken
6. Transmission gear damaged
Engine running and misfire as
motorcycle initial forward moving or
jumping suddenly (rear wheel
rotating as engine in running)
Poor initial driving
(Poor climbing performance)
1. Driving belt worn out or deformation
2. Balance weight roller worn out
3. Driving sliding gear shaft worn out
4. Driving disk spring deformation
5. Driving sliding gear shaft worn out
6. Greased in driving belt and sliding gear.
To this chapter contents
To Next Page
Loading...
Need help?
General
