GTS Technical Manual
26. March 2013 Edition: V2.00/2013 5-29
Copyright © 2013, Diversey Inc.
05.44.10 base - pump - 350B_V1.00.fm
5.4 Base
5.4.1 Removing of pump
Picture 44: Pump
• Remove clear water tank assembly according to chapter
REMOVING OF CLEAR WATER TANK ASSEMBLY.
Ensure that no water is in the fresh water system before you
disconnect the hoses.
• Disconnect the fresh water hoses.
Remarks
To get better access to the wiring you can remove the charger (05/
101). Just pull the charger towards you as it is only mounted on slides
without any fixation screw.
• Remove the front pump holder (05/103) to get better access.
• Tread out the pump (05/104) of the pump holder (05/103).
• Remove pump.
• Disconnect wires at the plugs near the connection block (05/
132), situated in the wiring harness.
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com
To Next Page
