Taski swingo 350B Technical Manual

GTS Technical Manual
26. March 2013 Edition: V2.00/2013 5-19
Copyright © 2013, Diversey Inc.
05.11.15 guide bar - articulation old setup - 350B_V1.00.fm
5.2 Guide bar
5.2.8 Removing of articulation old setup
Picture 31: Articulation
• Remove cover (02/103) according to chapter ADJUSTING OF
BOWDEN CABLE HANDLE.
• Release the counter nut with a 10mm fork spanner.
• Loosen the tension on the bowden cable with a 8mm fork
spanner.
• Lift bowden cable out of the articulation (02/113).
• Position spring upwards over the adjustment screw.
• Remove the end bolt of the bowden cable at the lock (02/110) of
the handle position.
• Remove the three screws (02/105) with 6mm Allen key.
• Pull off the sustaining disc (02/106).
To Order Parts Call 1-888-702-5326 - https://monsterfloorequipmentparts.com

Taski swingo 350B Specifications

General

Brand	Taski
Model	swingo 350B
Category	Scrubber
Language	English