Technogym ELLIPTICAL - Usb Port; Back-Up Battery; Bluetooth Connectivity; Pairing with Heart Rate Monitors

To exit stand-by, you must to vibrate the equipment to wake up the accelerometer.
3.7.2 USB PORT
The USB port has the ONLY purpose of charging the battery (for tablet and smartphone devices).
This function is deactivated when the equipment is in stand-by.
3.7.3 BACK-UP BATTERY
There is a back-up battery on the CPU Board that is used to keep the internal clock powered when
the equipment is o󰀨.
3.7.4 BLUETOOTH CONNECTIVITY
Bluetooth Module v. 5.x (BLE) is present on Technogym Elliptical.
The equipment is not visible into the tablet settings menu as the Bluetooth connection must always
take place via the Technogym Live App.
3.7.5 PAIRING WITH HEART RATE MONITORS
On Technogym Elliptical the heart rate monitor pairs directly with the Technogym Live App, installed
on the Tablet.
For details about Tablets compatibility, refer to the marketing material.
Moreover, the Tablets compatible with Technogym Elliptical must have BLE module.
TECHNOGYM ELLIPTICAL Technical Service Guide
Rev. 1.1
- 24 -
Uncontrolled copy if printed Uncontrolled copy if printed