TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 20
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
To Edit an existing serial number (other than new), select it and press the right arrow on the
keyboard. The serial number configuration window opens.
To create a new serial number, select new and confirm with: . The serial number configuration
window opens.
To delete a serial number, select it in the list and press the erase key on the keyboard.
Deleting serial number reference in a marking line doesn’t suppress the serial number.
To quickly feed a serial number, see feeding variable window
The configuration window is the following (creation mode):
The Name field correspond to the name of your serial number. It should be unique and different
from SHARED. If you edit an existing serial number, this field is grey as you cannot modify it.
The Value field is the current value of the serial number. It will be incremented of the step value
according to the defined frequency (number of markings)
For example the Value 2 will become 3 after 5 markings if the step is 1 and the frequency 5.
Other example: the value will change from 10 to 8 after 3 markings if the step is -2 and the frequency
3.
The number of characters (digits) shown in the Value field is very important as the serial number
cannot have more digits than the original one.
For example, if the Value is 1, the serial number will increase until 9 then will start again from 1.
But if Value is 01, the serial number will increase until 99 before starting back from 01.
To Next Page
Loading...
Need help?
General
