TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 53
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
drive, barcode reader...). The first character enter won’t be taken into account. In average or
high sleep mode the battery won’t charge.
o None : no sleep mode
o Average: After 5 minutes without activity, the screen shuts off, the motors power is
interrupted but the standard outputs stay active. The consumed energy is halved.
o High: After 5 minutes without activity, the machine goes into deep sleep, with a
consumption mode as low as possible (a few milliamps). The machine wakes up from
any outside event ( keyboard, USB key, …)
Button start and stop: this parameter allows to block start or stop button on the lexan if it is
on OFF.
Timestamp blocking: this parameter allows to block timestamp at the date and time at the
beginning of the marking. If there is a pause in the marking file, timestamps won’t change
before and after the pause.
The tool bar offers button: allowing to reset to Zero the marking counter..
Use to confirm your modifications.
Use to cancel your modifications.
e) Machine Parameters:
Several adjustment and information relating to the marking machine are available with the following
menu:
Window – Marking window configuration:
The marking window can be configured depending on the mechanics.
To Next Page
Loading...
Need help?
General
