TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 67
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
E. Plate Feeder.
Plate feeder is an equipment allowing marking automatically plate series.
To use the plate feeder, you must first declare it as an accessory of your marking machine.
To realise marking of a plate serie, check first that the feeder has enough stock and press on Start :
A window opens to ask how many plates should be marked:
Enter the number of plates and confirm with . The marking of the first plate is starting straight
after confirmation. The marking window displays the number of plates left to be marked, including
the current one.
The plates are taken one after each other to the marking position, held in place, marked, then put
aside.
To stop series press two times on : in the same way than to stop a standard marking
F. Battery (Optional):
Your MULTI4 equipment can use an optional battery pack allowing use without mains power supply.
TheMULTI4 marking equipment battery pack has a live expectancy of a minimum of 250
charge/discharge.
The battery pack (NimH) must be unplugged if you think it will not be used for more than a month.
To Next Page
Loading...
