TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 21
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
Zeros marked allows user to select if zeros beginning a serial number are marked or not. If positive,
001 will be marked as 001 else 001 will be marked as 1.
It is possible to reset the serial number automatically. Several choices are possible for this function:
None: the serial number is never reset.
Day: the serial number is reset every day.
Value: the serial number is reset when it reaches the maximum value defined in end at.
Team: the serial number is reset at each team change (see teams)
Week: the serial number is reset each week.
Month: the serial number is reset each month.
Year: the serial number is reset each year.
Hour: the serial number is reset each hour.
The starting at field is the value given to the serial number when it is reset. The end at field is the
maximum value used when we want a reset on the Value criteria.
Once again, the number of digits is essential for the Starting at and End at fields. There must be
coherence, and therefore a same number of digits for all this values.
It is important to realise that all blank fields (not grey) should be filled up, otherwise an error
message will be shown when confirming with .
The maximum number of serial number and variables accumulated in a file is 50.
The serial number SHARED is a specific serial number. Common to all files, you cannot delete it.
Its actual value and parameters are valid for all the files where it is used.
Timestamp – Marking dates and time.
A timestamp is a type of variable containing date and/or time and/or team name. It is automatically
updated by the system.
It is configured with the following window
To Next Page
Loading...
Need help?
General
