TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 74
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
4 machine mechanical components view for Multi4 mini
B. General maintenance informations
The maintenance operations of your Technomark equipment are limited.
The active part requiring the most care is the stylus assembly. It is absolutely necessary to lubricate
the stylus to avoid that it gets stuck inside its guide.
In case of accumulation of dust, metal parts…the stylus position can show some hard points affecting
the marking quality.
The lubrication frequency is variable, depending on the conditions of use of your machine.
Environment, number of marking, matrix, hitting force are all parameters affecting the maintenance
frequency.
As an indicator, we recommend (for a 5 x7 matrix):
Very intensive use (+ de 10 000 characters/day) : daily
Intensive use (4000 characters/day) : twice a week
Moderate use (1000 characters/day) : Once a week
To Next Page
Loading...
Need help?
General
