EasyManua.ls Logo

Technomark Multi4 V3 - C) Set Italic; D) Set Spacing

Technomark Multi4 V3
85 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 41
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
Use or press again the key to confirm your modifications.
Use to cancel your modifications.
c) Set Italic
Pressing italic set key allows using the position arrows to configure the incline of the current line text.
The key stays in the press state during the modifications:
Right and left or up and down arrows allow increasing or decreasing the incline value.
The italic value is indicated in a window at the top left of the screen:
A straight text has an italic value of 5. This value can vary from 0 to 9; below 5 the text leans to the
left and above 5 the text lean to the right.
Italic: 0 Italic: 9
Use or press again the key to confirm your modifications.
Use to cancel your modifications.
d) Set spacing
Pressing set spacing key allows using the position arrows to configure the character spacing of the
current line text.
The key stays in the press state during the modification:
Right and left or up and down arrows allow increasing or decreasing the spacing value between the
characters.
The spacing value is indicated in a window at the top left of the screen:

Table of Contents

Related product manuals