TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 75
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
C. Stylus cleaning and lubricating
Make sure the power is off
Position the machine sideways (stylus in horizontal position) or up on the column at the
highest (top) position.
Unscrew the nut by hand. Never use a tool.
Using a tool as a universal spanner for example can definitely damage your machine.
Pull out the guide, the return spring, the stylus and the core.
Clean as necessary the core, the stylus and the guide, using a dry, clean rag.
Use Vaseline oil from your maintenance kit: pour a little bit of fine oil inside the guide and on
the stylus.
Put back together the parts, in the order and in the way shown on the stylus assembly open
view.
Tighten manually the nut onto the electric coil without force (see the warnings and usage
precautions)
To Next Page
Loading...
Need help?
General
