TECO JSDG2S Series - Page 418

7-56
Cn095 CANopen detection bus off and disconnection level

Only JSDG2S model
contains this function

【
8-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
130 -- 128 ~ 256
★
--
RS-485 CANopen EtherCAT Pi Pe Pt S T
0062H 205FH - O O O O O
Setting Description: When CANopen Error Counter is greater than the set level, AL.029 alarm will occur.
Cn096 CANopen disconnection clearing comparison level

Only JSDG2S model
contains this function

【
8-2
】
Initial Value Unit Setting Range Effective Cn029 Reset
100 -- 0 ~ 127
★
--
RS-485 CANopen EtherCAT Pi Pe Pt S T
0063H 2060H - O O O O O
Setting Description: When CANopen Error Counter is smaller than the set level, automatically clear AL.029 (CANopen
communication disconnection)