TECO JSDG2S Series - Page 689

10-3
Servo Driver Model
JSDG2S-□□□□(-L)
JSDG2S-□□□□-E(L)
200V Class
10A 15A 20A 30A 50A3 75A3 100A3 150A3 200A3 300A3
Basic Specifications
Servo
capacity[kW]
0.1 0.4 0.75 1.0 2.0 3.0 4.4 5.5 7.5 15.0
Continuous
Output Current
[A rms]
2.1 3.5 4.4 5.6 9.2 14.0 25.3 33.2 42.1 78
Maximum
Output Current
[A rms]
5.7 8.5 11.3 17.0 28.3 42.4 56.6 84.9 113.0 170.0
Input Power
Primary
circuit
R, S, T
Single-phase or Three-phase
AC 200 ~ 230V, -15~+10%
Three-phase
AC 200 ~ 230V, -15~+10%
Control
circuit
r, s
Single phase
AC 200 ~ 230V, -15~+10%
Cooling Method
Natural
Cooling
Fan Cooling
Control Method
Three-phase Full-wave Rectification IGBT PWM Control
(Sine Wave Current Drive Method)
Encoder
Resolution
15 bits (absolute type) / 17 bits (incremental type/absolute type) / 23 bits
(incremental type/absolute type)
Internal Features
Display and
Operations
CHARGE Indicator; five-digit seven-segment display; four function keys
Control Mode
Position (external pulse command), position (internal position command), speed),
speed, torque, turret automatic tool change
and dual-mode switching (position/speed, speed/torque, position/torque)
Regenerative
Brake
Built-in brake transistor and break resistor/
can connect to external brake resistor
(Note 1)
Dynamic Brake
Built-in dynamic brake
Activates when Power Off, Servo Off, drive prohibition and error occur.
Protection Various abnormal alarms
Communication
Interface
JSDG2S-□□□□：USB / RS-485 / CANopen
JSDG2S-□□□□-L：USB / RS-485
JSDG2S-□□□□-E(L)
：
USB / RS-485 / EtherCAT
Note 1: Built-in Brake Transistor / can connect to external Brake Resistor