TECO JSDG2S Series - Page 690

10-4
Servo Driver Model
JSDG2S-□□□□
JSDG2S-□□□□-E
400V Class
10B 15B 25B 35B 50B 75B 100B 150B 200B
`Basic specification
Servo
capacity[kW]
0.75 1.0 2.0 3.0 4.4 7.5 11.0 15.0 22.0
Continuous
Output Current
[A rms]
2.0 2.6 6.0 8.0 11.5 16.0 22.0 41.0 52.0
Maximum Output
Current
[A rms]
5.7 8.5 14.0 19.8 28.3 42.4 56.6 84.9 113.0
Input Power
Primary
circuit
R, S, T
Three-phase
AC 380~480V, ±10%
Control
circuit
+24V, 0V
DC 24V, ±10%
Cooling Method Fan Cooling
Control Method
Three-phase Full-wave Rectification IGBT PWM Control
(Sine Wave Current Drive Method)
Encoder
Resolution
15 bits (absolute type) / 17 bits (incremental type/absolute type)
/ 23 bits (incremental type/absolute type)
Internal Features
Display and
Operations
CHARGE Indicator; five-digit seven-segment display; four function keys
Control Mode
Position (external pulse command), position (internal position command), speed,
torque, turret automatic tool change and dual-mode switching (position/speed,
speed/torque, position/torque)
Regenerative
Brake
Built-in brake transistor and break resistor/can connect to
external brake resistor
Built-in Brake
Transistor /
capable of
connecting Brake
Resistor
Dynamic Brake
Built-in dynamic brake
Activates when Power Off, Servo Off, drive prohibition and error occur.
Protection Various abnormal alarms
Communication
Interface
JSDG2S-□□□□：USB / RS-485 / CANopen
JSDG2S-□□□□-E
：
USB / RS-485 / EtherCAT