Tektronix DPO4000 Series User Manual

Installation
2. Connect the DPO4000 to your computer with
the appropriate USB or Ethernet cable.
To communicate between the DPO4000 and a
GPIB system, connect the oscilloscope to the
TEK-USB-488 GPIB-to-USB Adapter with a
USB cable. Then connect the adapter to your
GPIB system with a GPIB cable.
36 DPO4000 Series User Manual

Tektronix DPO4000 Series Specifications

General

Brand	Tektronix
Model	DPO4000 Series
Category	Test Equipment
Language	English