Application Examples
or Time,pushth
e resulting side menu items and turn the Multipurpose
knob to set the desired number of waveforms, number of violations, or the
time in seconds at which to stop. You can also choose Manual to stop the
testing manually.
8. Push the Run/Stop Test side-menu button from page 1 of the top level of the
limit test menu to toggle between starting and ending the limit test. After the
test ends, the oscilloscope will display the test statistics on the lower-level
corner of the screen. This includes the total number of cases tested, the
number of c
ases passed, and the number of cases failed.
50 TBS1000B and TBS1000B-EDU Series Oscilloscopes User Manual
To Next Page
Loading...
