Telephone Line Emulator User’s Manual
40-400-00020, Rev. M
97
Singapore Defaults
These items will be preset in configuration #9. Refer to the TLE-INTL section for more
details.
Dial Tone, Busy Tone, Reorder Tone, Ringing Tone, Ringing, SIT or Number
Unobtainable, Call Waiting Tone (Subscriber alerting signal, SAS)
Call Waiting Type: Normal (single) SAS tone, no CID will follow
FSK frequency
low tone (MARK) 1200 Hz
high tone (SPACE) 2200 Hz
level -28 dBm ( 6 dB above min detect level for
CPE)
Caller ID Mode (Ringing)
Multiple Message Format; sent during first long pause in ring cycle, normal
ringing follows
Normal CID Table Parameters (up to 9 maximum)
Date/Time
Calling Line Identity
Calling Party Name
Private CID Table Parameters (up to 6 maximum)
Date/Time
Calling Party Name Private
Out of Area (OTA) CID Table Parameters (up to 6 maximum)
Date/Time
Calling Party Name Unavailable
Dial Prefix for Private ∗67
Dial Prefix for Out of Area (OTA) ∗87
Calling Number 10 Digit Limit Disabled
Prefix Number Line 1 15551
Prefix Number Line 2 15552
Prefix Number Line 3 15553
Prefix Number Line 4 15554
Timers
Ring end to FSK 550 mS
On-hook channel Seizure 250 mS
On-hook Mark length 150 mS
Off-hook Mark length 67 mS
Ring Cadence Group 1 .4 sec on/.2 sec off/.4 sec on/ 2 sec off
Ring Cadence Group 2 .8 sec on/.4 sec off/.8 sec on/ 4 sec off
Ring Cadence Group 3 1 sec on/1 sec off/1 sec on/ 3 sec off
To Next Page
Loading...