Teltone TLE-A - International Caller ID Software Module (TLE-ICID); Advanced Emulation Software Module (TLE-ADV); Automated Test Software Module (TLE-TEST)

Telephone Line Emulator User’s Manual
40-400-00020, Rev. M 2
International Caller ID Software Module (TLE-ICID)
This module is an upgrade to TLE-INTL Software Module.
• Supports Multiple Caller ID formats
• Bellcore
• Bellcore Plus
• ETSI FSK
• ETSI DTMF
• Default Country Caller ID Configurations for:
• Australia (Bellcore Plus)
• France (ETSI FSK)
• Germany (ETSI FSK)
• Netherlands (ETSI DTMF)
• Singapore (Bellcore Plus)
• Sweden (ETSI DTMF)
• United Kingdom (ETSI FSK)
• USA/Canada (Bellcore)
• Many programmable parameters
Advanced Emulation Software Module (TLE-ADV)
Basic unit features plus:
• 16 stored configuration settings
• Echo emulation
• White noise emulation
• Satellite delay emulation
• Signal level measurement
• Enable Caller ID after every ring
• Enable/Disable DTMF detection (for pulse dial only applications)
• Metering tones
Automated Test Software Module (TLE-TEST)
Basic unit features plus:
• Control of TLE through serial port using API commands
• Ability to write customizable scripts for repetitive testing
• API definitions in both Visual Basic and C++ formats
• Programmable frequency sweep tone
• Status messages on front panel and through serial port
• Includes access to International and Advanced Emulation features
• Designed specifically for product development and production test applications
• International Caller ID features available with installation of TLE-INTL and TLE-ICID
software modules