Teltone TLE-A - Index

Telephone Line Emulator User’s Manual
40-400-00020, Rev. M 128
Index
2
2x2 port operation, 30
4
4 Port operation, 30
A
Acknowledge - CIDCW
TLE-ICID, 81
Active Configuration, 10, 11, 30
using DTMF, 10
using the serial port, 11
ADSI, 22
TLE-ICID, 71
Type III Caller ID, 22
Advanced Emulation Software Module (TLE-
ADV), 36
Alerting Sequence
TLE-ICID, 69, 76
Alternate Voice Message, 14, 34
Application Guide
TLE-ADV, 36
TLE-INTL, 39
Attenuation
Recorded Messages, 15
Satellite Delay, 37
Audio
Attenuation, 15
Line Monitor, 14
Recorded Messages, 14
dial access, 14
invalid number, 14
on disconnect, 14
Australia defaults
TLE-ICID, 70, 90
TLE-INTL, 45, 46
Austria defaults
TLE-INTL, 47
B
Basic Calling Operation, 9
Belgium defaults
TLE-INTL, 48
Bellcore
TLE-ICID, 75, 77
Bellcore Plus
TLE-ICID, 75, 78, 79
Bibliography
TLE-ADV, 35
TLE-BASE, 35
TLE-ICID, 102
TLE-INTL, 40
Brazil defaults
TLE-INTL, 49
Busy
Phone Number, 29
Tone, 15
cadence, 15
levels and frequencies, 15
C
Cadence
Dial Tone, 24
TLE-ICID, 88
Call Setup Message Components, 77
Call Waiting, 16
Cadence, 17
leading blank, 17
trailing blank, 18
Cancel, 16
TLE-ICID, 76, 86
TLE-INTL, 42
Tone Levels and Frequencies, 17
Type, 17
TLE-ICID, 73
with Caller ID Disabled, 16
Call Waiting Timing
TLE-ICID, 88
Caller ID
ADSI, 22
After Every Ring, 19
TLE-ADV, 36
CAS Tone, 21
Configuration
TLE-ICID, 72
FSK Tone, 21
FSK Transmission
TLE-ICID, 71
Group 1 Name, 20
Minimum Ring Off Time, 19
Mode, 20
Open Switch Interval, 22
Out of Area, 70
Private, 70
Select Name & Number, 20
Sequence, 19
Time, 19