Telephone Line Emulator User’s Manual
40-400-00020, Rev. M 46
Australia Defaults
The settings for this country will be stored in configuration #2.
Dial Tone:
Frequency: 425 Hz x 25 Hz (425 HZ modulated by 25 Hz)
Level: -10 dBm
Cadence: Continuous
Busy Tone:
Frequency: 400 Hz
Level: -10 dBm
Cadence: 375 mS on/375 mS off
Reorder Tone:
Frequency: 400 Hz
Level: -10 dBm
Cadence: 375 mS on/375 mS off, alternate level reduced by 10
dB
Ringing Tone:
Frequency: 400 Hz
Level: -10 dBm
Cadence: .4 S on/.2 S off/.4 S on/ 2 S off
Ringing:
Frequency: 25 Hz
Amplitude: 70 VRMS
Cadence: .4 S on/.2 S off/.4 S on/ 2 S off
SIT or Number Unobtainable:
Frequency: 400 Hz
Level: -10 dBm
Cadence: 2.5 S on/.5 S off
Comments: Australia uses Number Unobtainable tone or
recorded announcement will use announcement as
default
Call Waiting Tone:
Frequency: 425 Hz
Level: -10 dBm
Cadence: .1 S on/.1 S off/.1 S on every 4.7 sec
Line Impedance: Australia 220Ω +(820Ω || 120nF)
Line Reversal: Disabled
To Next Page
Loading...