Telephone Line Emulator User’s Manual
40-400-00020, Rev. M
99
UK Defaults
These items will be preset in configuration #9. Refer to the TLE-INTL section for more
details.
Dial Tone, Busy Tone, Reorder Tone, Ringing Tone, Ringing, SIT or Number
Unobtainable, Call Waiting Tone (Subscriber alerting signal, SAS)
CAS low tone: 2130 Hz @ -26 dBm
CAS high tone: 2750 Hz @ -26 dBm
CAS duration: 80 mS
CAS wait for acknowledge 160 mS
CAS alternate acknowledge digit DTMF D (i.e. both the default and program-
mable acknowledge signals are the same,
digit D)
FSK frequency
low tone (MARK) 1300 Hz
high tone (SPACE) 2100 Hz
level -28 dBm
Caller ID Mode (Ringing)
Multiple Message Format; send after line reversal and dual tone alerting
signal; normal ringing follows
Normal CID Table Parameters (up to 9 maximum)
Call Type = voice call
Date/Time
Calling Line Identity
Calling Party Name
Private CID Table Parameters (up to 6 maximum)
Call Type = voice call
Date/Time
Calling Line Identity Private
Calling Party Name Private
Out of Area (OTA) CID Table Parameters (up to 6 maximum)
Call Type = voice call
Date/Time
Calling Line Identity Unavailable
Calling Party Name Unavailable
Absence of Name = “O”
Network Message Status 00H = no messages
Extension for Network Operator:
Country 44 (UK)
Network Operator 0001
Version 001
Dial Prefix for Private 141
Dial Prefix for OTA ∗87
Calling Number 10 Digit Limit Disabled
Prefix Number Line 1 1-555-1
Prefix Number Line 2 1-555-2
Prefix Number Line 3 1-555-3
Prefix Number Line 4 1-555-4