Telephone Line Emulator User’s Manual
40-400-00020, Rev. M
59
Japan Defaults
The settings for this country will be stored in configuration #7.
Dial Tone:
Frequency: 400 Hz
Level: -15 dBm
Cadence: Continuous
Busy Tone:
Frequency: 400 Hz
Level: -15 dBm
Cadence: 500 mS on/500 mS off
Reorder Tone:
Comment: Not used, will use busy
Ringing Tone:
Frequency: 400 Hz
Level: -15 dBm
Cadence: 1s on/2 S off
Ringing:
Frequency: 17 Hz
Amplitude: 75 VRMS
Cadence: 1s on/2 S off
SIT or Number Unobtainable:
Comments: no SIT or Number Unobtainable tone per ITU
will use announcement as default
Call Waiting Tone:
Frequency: 400 X 16 Hz (400 Hz modulated by 16 Hz)
Level: -15 dBm
Cadence: .5 S on/.5 off/.5 on/ separated by 2.5 sec
Line Impedance: 600 Ω
Line Reversal: Disabled
To Next Page
Loading...