Telephone Line Emulator User’s Manual
40-400-00020, Rev. M 100
Message Type for CID not associated with ringing
Call Setup
Mode for CID not associated with ringing
Multiple message format; sent after line reversal and dual alerting tone
Parameters for CID not associated with ringing (up to 6 maximum)
Call Type = message waiting call
Date/time
Network message system status = 1 message
Timers
Ring end to FSK 550 mS
Dual tone to FSK 50 mS
Line reversal to dual tone 100 mS
DTMF/FSK end to ring start 200 mS
On-hook channel Seizure 250 mS
On-hook Mark length 150 mS
Off-hook Mark length 67 mS
Dual tone length 100 mS
Ring Cadence Group 1 .4 sec on/.2 sec off/.4 sec on/ 2 sec off
Ring Cadence Group 2 .8 sec on/.4 sec off/.8 sec on/ 4 sec off
Ring Cadence Group 3 1 sec on/1 sec off/1 sec on/ 3 sec off
User message #1 Set to: 13H,2 ;network status = 2 mes-
sages
User message #2 Set to: 13H,3 ;network status = 3 mes-
sages
User message #3 Set to: 13H,4 ;network status = 4 mes-
sages
To Next Page
Loading...