Telephone Line Emulator User’s Manual
40-400-00020, Rev. M
107
All users can preview the features of the TLE-ADV and TLE-INTL modules off-line. This is
accomplished off-line (not connected to the TLE or the TLE is turned off) by selecting File,
then New Configuration Set and then selecting the International and/or the Advanced
Emulation options. Attempts to program options not purchased will result in an error
message when a TLE is connected via the serial port.
Version 1.03
TLE_PC.EXE 3/2/98
TLE_PC V1.03
BIOS V1.00
DSP V1.00
MCU V1.02
Bug fix: On some screens, the APPLY button would be activated, even though no
changes were made.
Bug Fix: Dial Tone screen, changes made were not always displayed correctly.
Bug Fix: Saved file compatibility problem with TLE-ADV software module.
Version 2.00
TLE-TEST - Automated Test Software Module Release
TLE_PC.EXE 6/11/98
TLE_PC V2.00
BIOS V1.00
DSP V2.00
MCU V1.03 (TLE-TEST=V2.00)
Changes: Upgrade Three-Way-Calling feature to allow originator of Three-Way-Calling to
bring all three parties together, although the third party has not answered. Upgrade serial
port interface to fix a Windows NT 4.0 connection problem. A new communications port
configuration window allows for easier installation and testing of the serial port connection.
Additions: Dialed digits are now displayed on the front panel for each Line.
TLE-BASE - The Active Configuration is now selectable via the serial port using ASCII
strings.
TLE-INTL - Complex impedances for UK, Germany, and Australia were added.
A new feature is available as an item under the File menu option. This new option,
Reconfigure, allows users who purchase the TLE-TEST module to switch between
Automated Test operation and Standard operation. Also added is the ability to install an
upgrade (such as TLE-ADV or TLE-INTL) while the TLE is not connected at the time of the
installation. Once the TLE is connected to the PC, select, File, Reconfigure - New
Upgrade to download the new software to the TLE.
Version 2.01
TLE_PC.EXE 10/8/98
TLE_PC V2.01
BIOS V1.00
DSP V2.00
MCU V1.03 (TLE-TEST=V2.00)
Bug Fix: Defaults for Singapore Busy timing were incorrect and have been corrected to
750 ms on/750 ms off.