Telephone Line Emulator User’s Manual
40-400-00020, Rev. M 131
J
Japan defaults
TLE-INTL, 59
K
Korea defaults
TLE-INTL, 60
L
Line Recieve Attenuation
Loop Parameters, 26
Line Reversal
DC Signaling, 23
Line Reversal to DTMF
TLE-ICID, 87
Line Reversal to Dual Tone
TLE-ICID, 87
Loop Current
Loop Parameters, 26
Loop Parameters, 25
Impedance, 25
Line Receive Attenuation, 26
Loop Current, 26
TLE-INTL, 45
M
Maintenance, 116
cleaning, 116
servicing, 116
MDMF, 69
Call Setup Message Components, 77
Bellcore, 77
Bellcore Plus, 78
ETSI FSK, 78
Message Waiting Message Components, 79
Bellcore or Bellcore Plus, 79
ETSI FSK, 80
TLE-ICID, 77
Message Waiting
TLE-ICID, 75
Metering Tones
TLE-ADV, 37
TLE-INTL, 43
Minimum Ring Off Time
Caller ID, 19
TLE-ICID, 88
Miscellaneous, 26
Conference Type, 27
Confirmation Tones, 26
Disconnect Treatment, 26
Hunt Mode, 28
Invalid Number Response, 28
Network Delay, 28
Off-hook Mode, 27
Rotary Dial Only, 27
Test Tones, 27
N
Netherlands defaults
TLE-ICID, 70, 96
TLE-INTL, 61
Network Delay
Miscellaneous, 28
Network Message Status
TLE-ICID, 81
No Ringing CID
TLE-ICID, 75
Normal Caller ID
TLE-ICID, 72, 84
Normal CID Delivery
TLE-ICID, 71
Norway defaults
TLE-INTL, 62
Not Associated with Ringing Caller ID
TLE-ICID, 86
Number Unobtainable
TLE-INTL, 43
Screen, 43
O
Off-hook Detect Times
DC Signaling, 23
Off-hook Mark Time
TLE-ICID, 87
Off-hook Mode
Miscellaneous, 27
On/Off-hook Detect Times
DC Signaling, 23
On-hook Channel Seizure
TLE-ICID, 87
On-hook Mark Time
TLE-ICID, 87
Open Switch Interval
Caller ID, 22
Operational Screens, 14
Audio, 14
Busy Tone, 15
Dial Tone, 24
Loop Parameters, 25
Miscellaneous, 26
Phone Numbers, 28
Reorder, 31
Ringing, 32
Special Information Tones, 33
Voice Messages, 34
Options, 1
Ordering information, 117