Telephone Line Emulator User’s Manual
40-400-00020, Rev. M 20
Caller ID Mode
This feature allows the selection of the Caller ID Mode for each Line. The options include
Multiple Message format (default), Single Message format, or Disabled.
Select Name & Number
This feature allows the selection of one of three different Groups of Names and Numbers
(see Phone Numbers). The Names for Group 1 are programmable for up to 16
characters. The Names for Group 2 and 3 are fixed. The defaults for the Names follow
this paragraph.
Group 1 - Programmable names, uses Group 1 telephone numbers
Line 1 = ANDERSON ALLEN
Line 2 = JONES JENNIFER
Line 3 = SMITH SHARON
Line 4 = MACDONALD MIKE
Fixed names for Group 2, uses Group 2 telephone numbers
Line 1 = CLINTON BOB
Line 2 = REAGAN RICK
Line 3 = CARTER JOHNNY
Line 4 = FORD GARY
Fixed names for Group 3, uses Group 3 telephone numbers
Line 1 = MONTANA JIM
Line 2 = MARINO DON
Line 3 = AIKMAN TOM
Line 4 = KELLY JOHN
Group 1 Name
The Group 1 Name is programmable up to 16 characters. This is the name that is sent to
the Called Line from the Calling Line when Multiple Message format is used.
Visual Message Mode
This feature allows the selection of the Visual Message Mode for each Line. The options
include Multiple Message format (default), Single Message format, or Disabled.
To Next Page
Loading...