Telephone Line Emulator User’s Manual
40-400-00020, Rev. M
29
Figure 17. Phone Numbers Screen
Revert to Dial Tone
The Revert to Dial Tone number is programmable from 0 to 16 digits in length. When this
number is dialed a second dial tone is heard. Default is 9.
Dial Tone - Test Number
This is the telephone number dialed to access a continuous Normal Dial Tone as
programmed in the Dial Tone screen. The telephone number is programmable from 0 to
16 digits in length and the default setting is 83781.
Busy - Test Number
This is the telephone number dialed to access a continuous Busy signal programmed in
the Busy screen. The telephone number is programmable from 0 to 16 digits in length
and the default setting is 83782.
Reorder - Test Number
This is the telephone number dialed to access a continuous Reorder tone programmed in
the Reorder screen. The telephone number is programmable from 0 to 16 digits in length
and the default setting is 83783.
Ringback - Test Number
This is the telephone number dialed to access a continuous Ringback tone programmed
in the Ringing screen. The telephone number is programmable from 0 to 16 digits in
length and the default setting is 83784. In the TLE, ringback is always synchronized with
the ring signal at the called line.
To Next Page
Loading...