Tenda i9 User Manual

93
Appendixes
A.1 FAQ
Q1. I cannot access the web UI of the AP after entering 192.168.0.254. What should I do?
A1: Check the following items:
− Verify that the IP address of your computer is 192.168.0.X (X: 2~253).
− Clear the cache of your web browser or replace the web browser, and try login again.
− Disable the firewall of your computer or replace the computer, and try login again.
− If two or more APs are connected to your network without an AP controller, connect one
of the APs to your network and change the IP address of the AP. Repeat this procedure to
change the IP addresses of the other APs.
− The AP may be being managed by an AP controller and therefore its IP address is no
longer 192.168.0.254. In that case, log in to the web UI of the AP controller to view the
new IP address of the AP, and log in to the AP using the new IP address.
− If you have manually changed the IP address of the AP, change the IP address of your
computer to another IP address that belongs to the same network segment as the new IP
address of the AP and log in again using the new IP address of the AP.
− If the problem persists, restore the factory settings of the AP and try login again.
Q2. My wireless AP controller cannot find the AP. What should I do?
A2. Check the following items:
− Verify that the devices are connected properly and the AP has started.
− If VLANs have been defined on your network, verify that the corresponding VLAN has
been added to your AP controller.
− Restart the AP or restore the factory settings of the AP, and try scanning the AP again.

Tenda i9 Specifications

General

5 GHz	No
2.4 GHz	Yes
Bandwidth	24 GHz
Channel bandwidth	533 MHz
Transmitting power	20 dBmW
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100 Mbit/s
Maximum data transfer rate	300 Mbit/s
Internal	-
Placement	Ceiling, Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	System
Output current	1 A
Output voltage	12 V
Power consumption (max)	8 W
Security algorithms	WEP, WPA, WPA-PSK, WPA2, WPA2-PSK
Number of SSID supported	4
Storage temperature (T-T)	-30 - 70 °C
Operating temperature (T-T)	-10 - 40 °C
Operating relative humidity (H-H)	10 - 90 %
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antennas quantity	2
Antenna gain level (max)	2 dBi
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	184 mm
Height	38 mm