95
A.2 Setting the IP Address of Your Computer
Example: Windows 7
Step 1 Choose Start > Control Panel, click Network and Internet, click Network and Sharing
Center, and click Change adapter settings.
Step 2 Right-click Local Area Connection and choose Properties. Select Internet Protocol Version
4 (TCP/IPv4) and click Properties.
Step 3 Select Use the following IP address. Set IP address to an IP address that is different from
the IP address of the LAN port of the AP but belongs to the same network segment as the
IP address of the LAN port of the AP. Set Subnet mask to 255.255.255.0. Click OK.
To Next Page
Loading...
