WARNING
Before operating the instrument, be sure to read and understand fully the
operating instructions. This instrument is connected to hazardous voltages. It is
the responsibility of the user to ensure that the system is operated in a safe
This equipment contains exposed terminals carrying hazardous voltages. There are
no user serviceable components in the unit. All repairs and upgrades that require
the unit to be opened must be referred to HAEFELY TEST AG or one of their
nominated agents.
Unauthorized opening of the unit may damage the EMI protection of the system and will reduce its resistance to
interference and transients. It may also cause the individual unit to be no longer compliant with the relevant EMC
emission and susceptibility requirements. If the unit has been opened, the calibration will be rendered invalid.
In all correspondence, please quote the exact type number and serial number of the instrument and the version of
software that is currently installed on it.
Note
HAEFELY TEST AG has a policy of continuing improvement on all their products. The design of this instrument will
be subject to review and modification over its life. There may be small discrepancies between the manual and the
operation of the instrument, particularly where software has been upgraded in the field. Although all efforts are
made to ensure that there are no errors in the manuals, HAEFELY TEST AG accepts no responsibility for the
accuracy of this manual.
HAEFELY TEST AG accepts no responsibility for damage or loss that may result from errors within this manual.
We retain the right to modify the functionality, specification or operation of the instrument without prior notice.
All rights reserved. No section of this manual may be reproduced in any form, mechanical or electronic without
the prior written permission of HAEFELY TEST AG.
2014, HAEFELY TEST AG, Switzerland
To Next Page
Loading...