Texecom Premier Elite 24

Engineer Utilities Premier Elite 24,24-W, 48,48-W, 88, 168 & 640 Installation Manual
120 INS176-9
Print Log Data
E o elec:-
Enginee Uils
Enginee Uils
in og aa
e o Eens:
 
Press YES
to print
e o Eens:
 
E nte r a value or us e th e
SC R OLL key to inc rease
or dec rea s e the value
e. g. 50 = Las t 50 E vents
Enginee Uils
ie Een og
y

y

y
This option allows the ‘Event Log’ to be printed to a standard RS232
printer (see page 41 for details).
Soak Test Areas 24/48/88/168
E o elec:-
Enginee Uils
Enginee Uils
oa es eas
oa es eas:
  <
Press YES to default
the option
Use keys 1 - 8 to selec t
area s e.g. 2 = B. Us e the
area key to toggle between
area s A to H a nd I to P
oa es eas:
  <
Enginee Uils
ie Een og
y

y
2
y
When an area is selected for soak test, the soak test timer is started.
Any zones in the selected area with the soak test attribute will be put
on soak test for the duration of the soak test timer (see page 62). If
the area soak test option is subsequently deselected before the end
of the test, all zones are returned to normal operation.
When a zone is on soak test, it will not cause an alarm when
activated. However the system will log the event and will notify the
user that the zone has failed soak test.
A test failure will not prevent the user arming the system and will be
cleared when the engineers code is entered.
At the end of the soak test all zones that have passed the test will be
returned to normal operation.
Soak Test Areas 640
E o elec:-
Enginee Uils
Enginee Uils
oa es eas
oa es eas
<
Press YES to default
the option
oa es eas
EH<
Enginee Uils
ie Een og
y

y
y
Use the C hime &
Part keys
to sc roll betwe en
Are a G roups 1, 2, 3 & 4
A
CP
/
U se the Area ke y to s elect either
A-H or I-P a rea s .
Use the numeric buttons 1-8 to
toggle the require d are as on or off
oa es eas
<
When an area is selected for soak test, the soak test timer is started.
Any zones in the selected area with the soak test attribute will be put
on soak test for the duration of the soak test timer (see page 62). If
the area soak test option is subsequently deselected before the end
of the test, all zones are returned to normal operation.
When a zone is on soak test, it will not cause an alarm when
activated. However the system will log the event and will notify the
user that the zone has failed soak test.
A test failure will not prevent the user arming the system and will be
cleared when the engineers code is entered.
At the end of the soak test all zones that have passed the test will be
returned to normal operation.