Texecom Premier Elite 24

Premier Elite 24,24-W, 48,48-W, 88, 168 & 640 Installation Manual Engineer Utilities
INS176-9 115
Do Bell Test
Enginee Uils
o ell es
sh E o es
ell isaled
sh E o es
igi  
Pres s YE S to tes t ALL
channels or use keys 0 - 8
to s e lect individua l cha nne ls
e .g. 3 = C ha nnel 3
sh E o es
igi  
sh E o es
igi  
Press YE S again to clear ALL
channels or use keys 0 - 8
to c lea r indi vi du al c ha nnel s
e .g. 3 = C ha nnel 3
Use the SCROLL key to
select the required test
E o elec:-
Enginee Uils
Enginee Uils
ie Een og
sh E o es
ell is 
Pres s O MIT to invoke the
E ngineer s Hold O ff mode
of a Texecom B ellbox
y
1
y
O

£
3
N
This option allows the Bell, Speaker and various control panel
outputs to be tested.
The following outputs can be individually tested:
Test Bell The Bell output
Test Strobe The Strobe output
Test Speaker The Speaker output
Test Digi The Hardwired digicom outputs
Test Panel The panel outputs
Test RedCARE The plug on RedCARE outputs
Test Com???? The plug on Com 300/2400 digi channels
LCD Display The LCD keypad display
User Outputs
Any outputs that have the ‘User Test’
attribute (see page 81 for details).

Pressing OMIT at the Bell or Strobe Test will cause the Strobe
output to pulse 3 times, invoking Engineers Hold Off mode if a
Texecom bell box is connected.
Do Walk Test 24/48/88/168
Enginee Uils
o al es?
al es eas
 EH <
 E 
P res s YE S to walk tes t all
areas or use keys 1 - 8
to s elect/dese lect areas
Press CHIME to select:
Chime Once then lockout zone
No Chime at all
C hime on e very ac tiva tion
or
Zones ha need
esing ae :
Zone  7
on oo
Pre s s A RE A. to toggle the
display between the zones
that ha ve been tes ted and
the zone s that s till need tes ting
To view zones that have not
a ctivated re cently, e
i.e . 0 07 wi ll s how z ones that have
n o t a c ti va te d i n t he la s t 7 d a y s
n te r t he
numbe r of days require d
Zone 
onge I
E o elec:-
Enginee Uils
Enginee Uils
ie Een og
y
2
y
y
C
A

N
Any of the zones on the system can be walk tested to ensure that
they operate correctly. A walk test can only be performed when the
system or area is disarmed.

Once a zone has been activated it will not generate a chime
tone again. If however the
C
key is pressed, a zone will
chime every time it is activated.
The
Walk test menu also includes a last activation log that can be
recalled when doing a walk test. This log shows zones that have NOT
been activated over a period of days.
Pressing the
A
key will firstly show the zones that still need
testing, pressing the
A
key a second time will display the zones
that have not been activated that day, to view zones that have not
been activated for 3 days, type in 003 the maximum number of days
that can be recalled is 255, pressing the
A
key a third time will
revert back to the standard walk test display.