Texecom Premier Elite 24

Premier Elite 24,24-W, 48,48-W, 88, 168 & 640 Installation Manual Global Options
INS176-9 67
System Options
E o elec:-
loal pions
loal pions
yse ies
disoy ole
eel = 
loal pions
yse pions
Us e the YE S ke y to move
to the next option or use
the SC ROLL key to search
hie ole
eel = 
hie ole
eel = 8
Pre s s NO to edi t
the volume level
E nte r a value or us e th e
SC R OLL key to inc rease
or dec reas e the value
e. g. 8 = F ull Volume
hie ole
eel =
y
y
y
y
n
8
y
These options control various system functions.
0 - Advisory Volume
Controls the volume of advisory tones (entry/exit etc.) from
loudspeakers connected to the control panel (Alarm tones are always
full volume). 1 = min, 8 = max.
1 - Chime Volume
Controls the volume level of Chime tones from ALL loudspeakers. 1 =
min, 8 = max.
2 - No. Of Re-Arms
Controls the number of times that a zone will re-arm. Once the re-arm limit
has been reached, the zone is ‘Locked Out’ and will not cause any further
Intruder alarms.
3 - Anti-code Resets
Limits how many times a user can perform an Anti-code reset. Once
this limit is been reached, the system can only be reset using an
Engineer code. This counter is reset every month or whenever an
Engineers code is entered.
4 - Multiple Knocks
Controls how many times, a zone with the ‘Double Knock’ attribute,
must be activated, before an alarm occurs. The multiple knock count
can be applied to zones on an area basis, see page 59 for details.
5 - Clock Adjustment
Adjusts the accuracy of the clock by subtracting or adding time in
seconds at midnight every night. 0 = -50, 50 = 0 (no correction), 100
= +50.
6 - Quick Count
Set the number of 10milli Second pulses that are required within 30
Seconds in order for a zone with the ‘Quick Response’ attribute to
activate.
7 - Modem Level
When using a Com2400 this option allows adjustment to the
attenuation of the modem.
Modem Level 2 1 0 7 6 5 4 3
Attenuation (dB) +4 +2 0 -2 -4 -6 -8 -10
8 - Language Selection
Various languages are available for the control panels. Listed below are
the language sets, and the languages available. The Language set
number is defined on the product label where applicable by LS1, LS2
or LS3. The 640 has all languages listed available in the control panel.
24/48/88/168
LS1 LS2 LS3
English UK English UK English UK
English English English
Swedish Spanish Russian
French Italian Slovenian
Belgian Dutch Polish Czech
Text Danish Hungarian German
Norwegian Estonian
Finnish
640
English UK
English
Swedish
French
Belgian Dutch
Danish
Norwegian
Finnish
Spanish
Italian
Polish
Hungarian
Russian
Slovenian
Czech
German
Estonian
9 - Country Codes & Defaults
Country codes are used to define Telecoms requirements, and defaults
are loaded if available when the country code is chosen. The following
country codes are available and show the associated defaults loaded
by the panel.
Country Code Defaults
Export 0 UK
Russia 7 UK
South Africa 27 South Africa
Netherlands 31 UK
Belgium 32 Norway
France 33 France
Spain 34 UK
Hungary 36 UK
Italy 39 UK
Czech 42 UK
UK 44 UK
Denmark 45 Denmark
Sweden 46 Sweden
Norway 47 Norway
Poland 48 UK
Germany 49 UK
Finland 58 Norway
Australia 61 Australia
Test 97 UK
Themes 98 UK
Chinn 99 UK
Estonia 172 (372) UK