Texecom Premier Elite 24

Premier Elite 24,24-W, 48,48-W, 88, 168 & 640 Installation Manual Zone Setup
INS176-9 49
Ricochet Devices MT2
Option Switches
In this mode only option switch 3 should be on.
Introduction
The firmware upgrade now requires that Ricochet™ devices are learned through the Zone Setup Menu, and Premier Elite SmartKey™ are learned
through the User Setup menu, the "Configure Radio" menu in Engineer's Utilities is now redundant and should not be used on MT2 systems.
Learning Devices
To learn a device to a Zone select the Zone from the Zone Setup Menu, Zones that are capable of having a Ricochet™ device learnt to them will
be displayed as follows:-
Zone  
o Used
Fig 1
Fig 1indicates the pre-assigned zone number, the expander being used and the device slot on the expander.
Once a device has been learnt the display will be as Fig 2:-
Zone  ean:
I -
Fig 2
If you are unsure if a zone already has a device learned to it, you can go to the menu as in Fig 1, press R and then n
if a device is already
learnt the display will look like Fig 2, if not then it will look like Fig 3
Zone  ean:
ee -
Fig 3
Deleting Devices
To delete devices from the expander is the same as learning them; choose the zone you wish to delete, and follow the procedure to learn the
device, when the screen shows “Learning” press
R.
Learning Devices
Zone  anel
o Used
es o elec:-
Zone ep
y

Enter z one number
e. g 00 9 = Zone 00 9
Zone  
o Used
R
Zone  ean:
eaning s
Zone  ean:
I -
y
Zone  
o Used
n
*
n
*
y
Zone  i
       
n
*
y
Zone  i
       
n
*
Zone  eas:

n
*
y
Zone  e:
n
*
y
Zone  hie:
ilen
n
*
y
Zone  es:
eoe es 
n
*
y
Zone  ode:
Hyid
n
*
y
Zone  op:

n
*
y
y
n
n R
Zone  ean:
I -
n R 
Zone  ean:
ee -
n R y
Use the scroll key
to s ele ct the next
zone to learn a device too
* Please refer to previous page for details on programming these
options