THERMACUT EX-TRACK - Foreword; Safety Precautions

EX-TRACK
®
Operator Manual, Revision T-12
Foreword
Thank you for purchasing the Thermacut
®
EX-TRACK
®
CNC Cutting System, the system is available
with a oxy fuel cutting torch. The system has been designed and manufactured to deliver: reliability,
dimensional accuracy and reproducible profile part cutting. The system is easy to operate and
maintain, read this instruction manual before proceeding, be aware, there is a potential for danger
upon installation, operating or maintaining the system.
It is the responsibility of the operator/user to ensure the safe use/handling of the system, refer to
Thermacut’s terms and conditions of sale for specific responsibilities and limitations on liability.
Information in this document is subject to change without notice. The manual is for the convenience
and use of the Thermacut
®
EX-TRACK
®
CNC Cutting System purchaser, it is not a contract or
obligation on the part of Thermacut
®
“The Cutting Company”.
Safety precautions
This instruction manual describes the correct, effective and safe use of the system. All personnel
involved in the use or maintenance of the system should read this instruction manual thoroughly
and familiarize themselves in the correct and safe method of operation. A copy of this instruction
manual should be kept with the system at all times for easy reference.