EX-TRACK
®
Operator Manual, Revision T-1 3
Foreword ........................................................................................................................ 2
Safety precautions ........................................................................................................ 2
1. SAFETY INSTRUCTIONS ............................................................................9
1.1. General system safety precautions .................................................................. 12
1.1.1. System safety .................................................................................................... 12
1.1.2. Personal protective equipment ...................................................................... 12
1.1.3. Safety precautions prior to handling and operation ................................... 13
1.2. Plasma/oxy fuel gas cutting safety awareness ................................................. 14
1.2.1. Prevention of fire and explosion..................................................................... 14
1.2.2. Safe use of gas pressure regulators .............................................................. 14
1.2.3. Gas cylinder handling and storage ............................................................... 14
1.2.4. Oxy fuel gas hose safety precautions ........................................................... 14
1.2.5. Risk of fire ......................................................................................................... 15
1.2.6. Risk of burn injury ........................................................................................... 15
1.2.7. Safety in the workplace ................................................................................... 16
2. LOCATION OF WARNING AND SAFETY LABELS .....................................18
3. SPECIFICATION .......................................................................................22
3.1. System overview .................................................................................................. 23
3.1.1. Main features .................................................................................................... 23
3.1.2. Range of application ........................................................................................ 23
3.2. System parts description .................................................................................... 23
3.3. Technical parameters .......................................................................................... 24
3.4. Torch height controller........................................................................................ 24
3.5. Gas supply ............................................................................................................ 25
4. UNPACKING AND ASSEMBLY ..................................................................26
4.1. Packing list ............................................................................................................ 27
4.2. System assembly ................................................................................................. 28
4.2.1. Parts check ........................................................................................................ 28
4.2.2. Fitting the main unit on to the longitudinal guide rail ................................. 28
4.2.3. Fitting the transverse guide rail ...................................................................... 29
4.2.4. Fitting the torch height controller .................................................................. 29
4.2.5. Gas supply connection .................................................................................... 30
4.2.6. Electrical connection ....................................................................................... 30
5. CUTTING PROCESS .................................................................................32
5.1. Prior to operating the system ............................................................................. 33
INDEX
To Next Page
Loading...
