THERMACUT EX-TRACK - Location of Warning and Safety Labels

EX-TRACK
®
Operator Manual, Revision T-118
2. LOCATION OF WARNING AND SAFETY
LABELS
SECTION 2.
LOCATION OF WARNING AND SAFETY LABELS:
Warning and Safety labels have been affixed to the system for the purpose of hazard awareness
and correct use of the system. Prior to operating the system carefully read the labels and follow the
instructions. Do not remove labels. Always keep the labels legible.
! Caution!
Plasma arc rays can burn eyes and skin
Noise can damage hearing
Flying sparks (arc spray) can cause injury, fire or explosion
Caution! Read operator´s manual
Cutting can cause fire or explosion
Electric shock can kill
Plasma arc can injure
Flying sparks (arc spray) can cause injury, fire or explosion
Hot parts can cause severe burns
Smoke and gases can be hazardous
Caution when cutting around gas cylinders
Do not exceed the recommended duty cycle, this can lead to overheating and cause damage to the system
Magnetic field can affect pacemakers
Plasma cutting can cause interference
Safety sticker