Thermo NanoDrop One User Manual

3
Learning Center
NanoDrop One Viewer Software
Thermo Scientific NanoDrop One User Guide 265
Manage Custom Methods
The Viewer software is your tool for creating and managing custom methods, which contain
user-defined settings that can be used to acquire data with the instrument. Custom methods
can be made with or without standards.
Create Custom Method
Create method to be used for sample measurements with user-defined settings.
Create new custom method
– from Viewer Home screen, choose Custom Methods (menu) > Manage Custom
Methods
– in Manage Custom Methods box, choose one of the following:
– Create Formula Method (if your method will not have standards)
– Create Standard Curve Method (if your method will have standards)

Thermo NanoDrop One Specifications

General

Wavelength Range	190-850 nm
Pathlength	1 mm and 0.2 mm (Auto-ranging)
Detection Limit	2 ng/µL (dsDNA)
Light Source	Xenon flash lamp
Maximum Concentration	15, 000 ng/µL (dsDNA)
Detector	2048-element linear silicon CCD array
Measurement Time	< 5 seconds
Weight	2.0 kg (4.4 lbs)
Nucleic Acid Quantitation	Yes
Protein Quantitation	Yes
Display	7-inch capacitive touch screen
Sample Volume	1-2 μL
Absorbance Precision	±0.002 A
Operating Voltage	100 to 240 V AC
Dimensions (W x D x H)	20 cm x 25 cm x 15 cm (8 in. x 10 in. x 6 in.)
Software	Thermo Scientific™ software
Connectivity	USB, Ethernet, Wi-Fi
Operating Temperature	15 - 35°C
Dimensions	20 cm x 25 cm x 15 cm (8 in. x 10 in. x 6 in.)
Absorbance Range	0 - 550 A (10 mm equivalent)