Thermo NanoDrop One User Manual

Thermo Scientific NanoDrop One User Guide 311
6
About this Help System
Conventions Used
Safety precautions and other important information use the following format:
Trademark Information
DYMO and LabelWriter are either trademarks or registered trademarks of Newell
Rubbermaid in the United States and/or other countries.
Wi-Fi is either a trademark or a registered trademark of Wi-Fi Alliance in the United States
and/or other countries.
Bluetooth is either a trademark or a registered trademark of Bluetooth Special Interest Group.
Windows is either a trademark or a registered trademark of Microsoft Corporation in the
United States and/or other countries.
All other trademarks are the property of Thermo Fisher Scientific inc. and its subsidiaries.
CAUTION Indicates a hazardous situation which, if not avoided, could result in minor or
moderate injury.
NOTICE Follow instructions with this label to avoid damaging the system hardware or
losing data.
Note Contains helpful supplementary information.
Tip Provides helpful information that can make a task easier.

Thermo NanoDrop One Specifications

General

Wavelength Range	190-850 nm
Pathlength	1 mm and 0.2 mm (Auto-ranging)
Detection Limit	2 ng/µL (dsDNA)
Light Source	Xenon flash lamp
Maximum Concentration	15, 000 ng/µL (dsDNA)
Detector	2048-element linear silicon CCD array
Measurement Time	< 5 seconds
Weight	2.0 kg (4.4 lbs)
Nucleic Acid Quantitation	Yes
Protein Quantitation	Yes
Display	7-inch capacitive touch screen
Sample Volume	1-2 μL
Absorbance Precision	±0.002 A
Operating Voltage	100 to 240 V AC
Dimensions (W x D x H)	20 cm x 25 cm x 15 cm (8 in. x 10 in. x 6 in.)
Software	Thermo Scientific™ software
Connectivity	USB, Ethernet, Wi-Fi
Operating Temperature	15 - 35°C
Dimensions	20 cm x 25 cm x 15 cm (8 in. x 10 in. x 6 in.)
Absorbance Range	0 - 550 A (10 mm equivalent)