Thermo NanoDrop One - Microarray Reported Results

Measure Microarray
Thermo Scientific NanoDrop One User Guide 27
Microarray Reported Results
Microarray measurement screen
For each measured sample, this application shows the absorbance spectrum and a summary of
the results. Here is an example:
Drag tab
down/up to
see more/less
sample data
Dye
concentration(s)
Tap row to
select sample
and update
spectrum; tap
more rows to
overlay up to five
spectra. Press
and hold
sample row to
view
measurement
details.
Nucleic acid
concentration
Tap to select unit
UV-visible spectrum
Menu of options;
tap to open
Sample name;
tap to edit
Swipe screen left to
view table with more
measurement results
Pinch and zoom to
adjust axes;
double-tap to reset
Tap to end
experiment and
export data
Note
• A baseline correction is performed at 750 nm (absorbance value at 750 nm is
subtracted from absorbance values at all wavelengths in sample spectrum).
• Micro-volume absorbance measurements and measurements taken with nonstandard
cuvettes are normalized to a 10.0 mm pathlength equivalent.