ThermoFisher Scientific QuantStudio 12K Flex OpenArray AccuFill System - Workflow

Workflow
1
OpenArray
™
AccuFill
™
Software v2.0 workflow
Initialize the system (page 18)
(Optional) Download or prepare TPF or SPF files (page 23)
(Optional) Map plates (page 25)
•
(Optional) Create an OpenArray
™
Plate file (CSV)
•
(Optional) Create a 384-well sample plate file (CSV)
•
(Optional) Map samples from a 96-well plate to a 384-well sample plate file (CSV)
Set up and start the run
•
Set up and start the run—quick run workflow
2
(page 13)
•
Set up and start the run—full run workflow
3
(page 13)
2
Set up and start the run—quick run workflow
Configure the run
•
Configure the run with sample plate information (page 43)
•
Configure the run without sample plate information (page 44)
Verify the run setup and start the run—quick run workflow (page 45)
3
Set up and start the run—full run workflow
Configure the experiment design for the full run workflow (page 51)
Add or edit sample names—full run workflow (page 52)
Add or edit the sample names and other information associated with each sample.
Verify the run setup and start the run—full run workflow (page 52)
Chapter 1 Product information
Workflow
1
QuantStudio
™
12K Flex OpenArray
™
AccuFill
™
System User Guide
13