ThermoFisher Scientific QuantStudio 12K Flex OpenArray AccuFill System - Page 20

To start a system self-test manually, see “Perform a system self-test (manual start)” on page 84.
1.
In the Deck screen, click one of the following options:
•
Quick Run
•
Full Run
•
Service4Diagnostics
The System self-test dialog box is displayed.
2.
Prepare the instrument for the self-test (see “Set up the system” on page 19).
3.
Click Start test.
The system performs a self-test. The status of the self-test is displayed in the dialog box.
The Quick Run screen, the Full Run screen, or the Statistics tab of the diagnostics screen is displayed
when the self-test is complete.
Chapter 3 Initialize the system
Perform a system self-test
3
20
QuantStudio
™
12K Flex OpenArray
™
AccuFill
™
System User Guide