Topcon GTS-601 - Page 51

4-7
4 PROGRAM MODE
5 Press [F6](SET) key.
The prism position will be decided.
[F6]
6 Collimate ground point G.
Collimate
G
7 Press [F6](SET) key.
The position of point G will be decided. *1)
[F6]
8 Collimate target K.
Vertical distance (VD) will be shown. *2)
Collimate
K
*1)To return to procedure
3 , press [F2](HD) key.
To return to procedure
4 , press [F3](V) key.
*2)To return to main menu, press [F1](EXIT) AND [F5](YES) key.
REM
(2)Vertical Angle
V : 120°30'40"
SET
REM
(2)Vertical Angle
V : 95°30'40"
SET
REM
VD : 0.000 m
EXIT HD V
REM
VD : 9.876 m
EXIT HD V