HiPer+ Specifications
P/N 7010-0526
C-3
Controls Three FN keys
Data Features
Up to 20 Hz update rate for real time position and raw
data (code and carrier)
10cm code phase and 0.1mm carrier phase precision
RTCM SC104 version 2.1, 2.2, and 2.3 I/O
Multiple Base RTCM
Geoid and Magnetic Variation models
RAIM
Different DATUMs support
Output of grid coordinates
CMR and CMR+ support
I/O
Communication
Ports
Up to four, external high speed RS232 serial ports, an
external USB port, and an internal Bluetooth
communication port
Connectors Modem Antenna, 1PPS output (optional), Event Marker
input (optional), PWR, USB
MINTER Four external LEDs
ON/OFF control input
Antenna
GPS/GLONASS
Antenna
Internal
Antenna Type Microstrip
Memory
Internal Memory Compact flash card (non-removable)
Capacity Standard – 0 MB
Max – 1 GB
Logging Time 53 hours (8 MB, 15sec, L1/L2, 7 satellites)
Table C-1. HiPer+ Specifications (Continued)
Component Details
To Next Page
Loading...
