Chapter 6
P/N 7010-0369 www.topconpositioning.com
6-1
Troubleshooting
In general, as long as you follow the maintenance and safety
instructions provided in this manual, you should have few problems
with your System Five™ Control Box. This chapter will help you
diagnose and solve some common problems you may encounter
with your Control Box.
Before contacting your local Topcon Distributor, try the following:
• Check that all cables are securely and properly connected to the
various components of the System Five (control box, TM-1
mast, laser receiver, valves, sensor, etc.).
• Disconnect cables and inspect them for damage or
contamination. Clean all connections with an electrical contact
cleaner.
To Next Page
Loading...
