Introduction and Setup
Topcon AG System Five Operator’s Manual
1-10
After setting up the System Five, see:
• “Control Box Usage” on page 2-1 for how to use the Control
Box and Performance Menu settings.
• “Laser Setup” on page 3-1 for setting up and checking the laser
transmitter.
• “Surveying” on page 4-1 for using the System Five during a
survey.
• “Land-leveling” on page 5-1 for using the System Five for
land-leveling.
End of Day Maintenance and Care
At the end of the day, performing general maintenance and storing
mobile parts will help to keep your System Five in top condition.
• Insert cables into appropriate storage connectors after removing
the Control Box.
• Remove the Control Box and the Laser Receiver and dust with
a dry or damp non-abrasive, soft cloth (see “Care and
Preventive Maintenance” on page 1-2 for more cleaning
information).
• Store the various removable components in the carrying case.
• Check for oil leaks in hydraulic assemblies and hoses.
To Next Page
Loading...
