Topcon TRC-NW8F - Page 33

31
PREPARATIONS
Setting of auto focus function
Set the auto focus function ON/OFF. (Factory default is "ON".)
When the auto focus function is set to ON, focusing is automatically performed when taking a
picture.
1 On the "MENU" screen, make sure that "AUTO" is selected and press the .
2 Press the or to select "FOCUS"
and then press the .
3 Select "ON" or "OFF" with the or
and then press the . The selected data is set.
ENTER SWITCH
DOWNWARD CURSOR SWITCH
UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
ON
SHOOT
FIXATION
FLASH
SMALL PUPIL
OFF
FOCUS
MEMORY
*The above figure shows the screen of TRC-NW8F.
DOWNWARD CURSOR SWITCH
UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
SHOOT
FIXATION
FLASH
SMALL PUPIL
OFF
FOCUS
ON
MEMORY
*The above figure shows the screen of TRC-NW8F.