65
OBJECTIVE OPERATIONS
STEREO PHOTOGRAPHY
1 Press the on the Monitor screen.
The ( ) scale is set vertically.
2 Move the instrument body by operating the control lever to bring the alignment bright spot
into the ( ) scale.
With this, focusing and positioning are done. Photography is not done yet.
With this, the ( ) scale moves to the right.
When the auto focus function is ON, the focusing knob does not return to the initial posi-
tion in stereo photography even if you pull the base unit toward you.
When the auto focus function is OFF, align the split line by turning the focusing knob.
When the auto shoot function is OFF, bring the alignment bright spot into the ( ) scale
and then press the .
3 Bring the alignment bright spot into the ( ) scale, which has already been moved to the right.
With this, the instrument takes a picture of the one side and the preview screen appears.
When the auto shoot function is OFF, bring the alignment bright spot into the ( ) scale.
Next, press the .
STEREO PHOTOGRAPHY SWITCH
To Next Page
Loading...
