40
PREPARATIONS
In some types of the digital cameras to be installed, the SD card cannot be used.
As more images are recorded on the SD card, it takes longer to display the Monitor
screen.
When you exchange digital cameras, please exchange SD card at the same time.
Before installing or removing the SD card, make sure that the power of the digital cam-
era is OFF.
Menu functions list
You can also change the set data for other items in the same way as setting of the auto func-
tions. The settable menus are shown below.
Setting of the AUTO functions (AUTO)
*"ILLUMINATION" is displayed only in TRC-NW8F plus.
Setting of the flash level (FLASH)
*"GREEN BASE LVL" is displayed only in TRC-NW8F and "FAF BASE LVL", only in TRC-NW8F plus.
Item Options Initial setting Explanation
FOCUS ON/OFF ON Select ON/OFF of auto focus function.
SHOOT ON/OFF ON Select ON/OFF of auto shoot function.
SMALL PUPIL ON/OFF ON Select ON/OFF of auto small pupil selector function.
ILLUMINATION ON/OFF ON Select ON/OFF of auto illumination level adjustment
function.
Item Options Initial setting Explanation
FLASH MODE NORMAL
LOW1/2
LOW1/4
NORMAL When selecting "LOW1/2" and "LOW1/4", the "low inva-
sive mode" is accessed. The flash level is changed to
"1/2" and "1/4" of the reference value and the ISO sen-
sitivity of the digital camera, to "×2" and "×4".
COLOR BASE
LVL
-4 to +4 0 Set the reference value of flash level (in color photogra-
phy).
When you set "0", the reference value of flash level is
7.9W·s.
GREEN BASE
LVL
-4 to +4 0 Set the reference value of flash level (in red-free pho-
tography).
When you set "0", the reference value of flash level is
22W·s.
FAF BASE LVL -4 to +4 0 Set the reference value of flash level (in FAF photogra-
phy).
When you set "0", the reference value of flash level is
45W
·s.
To Next Page
Loading...
